Filter
Top Products
SET BPORT_LEC BUS_RATE_LIMIT
2-71
SET BPORT_LEC
BUS_RATE_LIMIT
Use the SET BPORT_LEC BUS_RATE_LIMIT command to set the BUS rate from
the DMM. BPORT is an abbreviation for Bridge Port.
LEC ports are logical ports, all of which overlay one physical ATM/Synchronous
Optical Network (SONET) port.
Format
Example
The following command sets the LEC in slot 4, port 1 to a BUS rate limit of
5000:
CB5000> set bport_lec 4.1 bus_rate_limit 5000
Bridge Port 04.01 bud rate limit parameter set.
Related Command
SHOW BPORT_LEC CONFIGURATION
slot.lec Identifies the slot and LEC for this operation.
slot (1 through 17) is the slot number and
lec is one of up to 64 LAN
Emulation Clients defined as logical ports for the ATM Backbone
SwitchModule. For example, to identify LEC 32 on the ATM Backbone
SwitchModule in slot 4, enter
4.32
option Specifies the BUS rate limit in packets/seconds. Values range from
0 through 65535. Default value is 5000 packets/sec. A value of 0 (zero)
means no limit.
set bport_lec bus_rate_limit
option
slot.lec