Filter
Top Products
2-348
SHOW LOG TRAP_LOG
SHOW LOG
TRAP_LOG
Use the SHOW LOG TRAP_LOG command to display the log entries for the most
recently sent traps. The trap log is a circular buffer that can hold up to 15 traps.
When the log exceeds the buffer, the software writes over the oldest trap with
the newest trap information. The oldest trap is always displayed first.
The log is lost if the hub is reset or if power is lost to the hub.
Because the trap log captures only the trap information that is displayed on the
console, you must set alerts to capture those traps you want to view.
Format
Example
The following command displays a list of nonfatal system traps:
CB5000> show log trap_log
-------------------TRAP 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Message received from this device on 15:43 Mon 24 Jul 95:
Enterprise: 3Com
Enterprise Specific trap: Security Environment Change
Message Information:
Se c ur i t y T r ap R e as o n: I N TR US I O N_ AT T E MP T
Slot Number: 3
Port Number: 1
Port Mode: ENABLED
Intruder MAC Address: 08 00 8f 30 09 0a
Related Command
CLEAR LOG TRAP_LOG
show log trap_log