Filter
Top Products
2-324
SHOW COUNTER
fast_ethernet
Specifies that you want to display counter error statistics for a Fast
Ethernet network.
igmp_snooping
Specifies that you want to display counter error statistics for
igmp_snooping.
peak_rates
Specifies that you want to display counter error statistics for
peak_rates.
fddi_mac
Specifies that you want to display all FDDI mac address counter error
statistics.
fddi_port
Specifies that you want to display FDDI port counter error statistics
from port 1 or port 2.
all
Specifies that you want to display counter error statistics for all FDDI
MACs.
1 or 2 Specifies that you want to display counter statistics for FDDI MAC
addresses from port 1 or port 2.
interface
Specifies that you want to display counter statistics for the interface
connected to a specified network.
100base_x
Specifies that you want to display 100base_x counter statistics for a
specified module or all modules.
network Specifies any network implemented in your CoreBuilder
®
5000 hub
(ethernet_1 or fast_ethernet_2, for example).
ip_fragmentation
Specifies that you want to display ip fragmentation counter statistics.
packet_channel
Specifies that you want to display information about traffic and activity
on the PacketChannel backplane.
module
Indicates a specific module for which you want display counter
statistics.
slot Indicates the slot location for a specific module.
repeater
Displays counter statistics for a repeater.
port
Specifies the port for which you want to display counter statistics for a
repeater.
rmon
Displays Token Ring Remote Monitoring (RMON) counter statistics from
several Token Ring error counters. RMON works best with a
workstation-based SNMP manager, but can also be used from the
DMM command interface.
hosts
Specifies the RMON hosts that contain counter error statistics that
summarize network activity. For each packet that travels the
network, the TR-NMC extracts the source and destination address
and adds the MAC addresses to the host table, and updates
appropriate host-specific counters.
The CoreBuilder
®
5000 host table does not allow you to delete entries.
If the table becomes full, new hosts are dropped
ring_station
Tracks the following status and statistics:
■
Control status and statistics for each active ring
■
Token Ring status information for each station that has been a ring
member
■
Token Ring error and diagnostic statistics for each station that has
been a ring member
■
Station order on monitored rings (Order group)
■
Download of configuration information, and removal of ring
stations (Config group) This group collects information from the
MAC layer, including ring use and error counters.
tr_mac_layer
Specifies counter error statistics from the RMON Token Ring MAC
layer, including ring use and error counters.