Filter
Top Products
2-394
SHOW SONET STATUS
SHOW SONET STATUS
Use the SHOW SONET STATUS command to display Synchronous Optical Network
(SONET) status information for a PHY port.
A PHY is a physical port.
Format
Example
The following command displays the SONET status information for slot 4:
CB5000> show sonet 4.1 status
Slot Module Version Network General Info
---- ---------- ------- ----------- 3 ------------------
04 6602M-MOD v1.00 N/A
Medium Type SONET
Medium Time Elapsed (sec): 500
Medium Valid Intervals: 50
Medium Line Coding: NRZ
Medium Line Type: SHORT
Medium Clock Source: EXTERNAL
Section Current Status: OKAY
Line Current Status: OKAY
Path Current Status: OKAY
Path Current Width: STS
M/S/L Speed (bps): 155
M/S/L Admin Status: ENABLED
M/S/L Oper Status: UP
M/S/L Last Change: <timestamp>
Path Speed (bps): 155
Path Admin Status: ENABLED
Path Oper Status: UP
Path Last Change: <timestamp>
See the ATM Backbone SwitchModule User Guide for definition of terms and
additional information.
slot.phy Identifies the slot and port for this operation.
slot (1 through 17) is the slot number and phy (1 or 2) is the PHY port
number. For example, to identify PHY port 1 on the module in slot 4,
enter
4.1
status
slot.phy
show sonet