Filter
Top Products
SET MODULE MODULE_BYPASS
2-153
SET MODULE
MODULE_BYPASS
Use the SET MODULE MODULE_BYPASS command to insert or bypass ONline
Token Ring MAU Modules in a ring.
You must use this command to insert the module into the ring initially. When
you insert a Token Ring module in a hub with an active network management
module, the module is automatically placed into bypass mode so that
unauthorized users cannot insert into the network.
Refer to the specific Token Ring Installation Guide for more information on
insert and bypass mode.
Format
Example
The following command inserts the Token Ring MAU Module in slot 5 into the
ring it is connected to:
CB5000> set module 5.1 module_bypass insert
Module 5.01 INSERTED.
Related Command
SHOW MODULE
slot.
1
Slot containing the Token Ring module you are configuring.
bypass
Traffic still goes through the Ring-In and Ring-Out ports on the
module, but does not travel to the eight media ports.
insert
Insert Token Ring modules into the ring to which the Ring-In and
Ring-Out cables are connected.
set module
slot.
1
module_bypass
bypass
insert