Filter
Top Products
SET BPORT_LEC TIME
2-83
Example
The following command sets the flush response timeout period for the LEC in
slot 4, port 1 to 3 seconds:
CB5000> set bport_lec 4.1 time flush_timeout 3
Bridge Port 04.01 parameter set.
Related Command
SHOW BPORT_LEC CONFIGURATION
max_unknown_frame_
time
Specifies the time (in seconds) in which a LEC will send no more
than the maximum unknown frame count frames to the
Broadcast and Unknown Server (BUS) for a given unicast LAN
destination.
option Choose from a range of 1 through 10.
path_switch_delay
Time (in seconds) since sending a frame to the BUS after which
the LEC may assume the frame has been delivered or discarded.
You can use this attribute to bypass the flush protocol.
option Choose from a range of 1 through 8.
vcc_timeout
Timeout (in seconds) after which a Data Direct VCC should be
released if it has not been used to transmit or receive data
frames.
option Choose from a range of 0 through 2147483647.