Filter
Top Products
SET ATM Q93B
2-61
SET ATM Q93B
Use the SET ATM Q93B command to specify the values of Q93B timers
.
CAUTION:
Do not change the default settings for this command. Any changes
you make may cause interoperability problems with other ATM equipment.
Format
slot Identifies the slot for this operation.
slot (1 through 17) is the slot number.
t303
Specifies (in seconds) the t303 value.
option Choose from a range of 1 through 300. The default value for User
Network Interface (UNI) version t3.0/3.1 is 4/4.
t308
Specifies (in seconds) the t308 value.
option Choose from a range of 1 through 300. The default value for UNI
Version 3.0/3.1 is 30/30.
t309
Specifies (in seconds) the t309 value.
option Choose from a range of 1 through 300. The default value for UNI
Version 3.0/3.1 is 90/10.
t310
Specifies (in seconds) the t310 value.
option Version 3.0/3.1 is 10/10.
t313
Specifies (in seconds) the t313 value.
option Choose from a range of 1 through 300. The default value for UNI
Version 3.0/3.1 is 4/4.
t316
Specifies (in seconds) the t316 value.
option Choose from a range of 1 through 300. The default value for UNI
Version 3.0/3.1 is 120/120.
t317
Specifies (in seconds) the t317 value.
option Choose from a range of 1 through 300. The default value for UNI
Version 3.0/3.1 is 60/60.
t322
Specifies (in seconds) the t322 value.
option Choose from a range of 1 through 300. The default value for UNI
Version 3.0/3.1 is 4/4.
set atm q93b
slot
t308
t303
t309
t310
t313
t316
t317
t322
option
option
option
option
option
option
option
option