Filter
Top Products
SET BPORT_LEC LECS_ATM_ADDRESS
2-77
SET BPORT_LEC
LECS_ATM_ADDRESS
Use the SET BPORT_LEC LECS_ATM_ADDRESS command to specify the ATM
address of the LAN Emulation Configuration Server
(
LECS) when configuration
mode is set to automatic.
The ATM address is 20 hexadecimal numbers separated by periods. Each
number can range from 0 to FF. However, the following addresses are illegal:
■
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
■
F F. F F. F F. F F. F F. F F. F F. F F. F F. F F. F F. F F. F F. F F. F F. F F. F F. F F. F F. F F
BPORT is an abbreviation for Bridge Port.
LEC ports are logical ports, all of which overlay one physical ATM/Synchronous
Optical Network (SONET) port.
Format
Example
The following command sets the ATM address of the LECS in slot 4, port 1:
CB5000> set bport_lec 4.1 lecs_atm_address 39.99.99.99.ac.00.00.00.
00.99.99.01.02.03.04.05.06.07.08.00
Bridge Port 04.01 parameter set.
Related Command
SHOW BPORT_LEC CONFIGURATION
slot.lec Identifies the slot and LEC for this operation.
slot (1 through 17) is the slot number and
lec is one of up to 64 LAN
Emulation Clients defined as logical ports for the ATM Backbone
SwitchModule. For example, to identify LEC 32 on the ATM Backbone
SwitchModule in slot 4, enter
4.32
ATM address Specifies the ATM address of the LAN Emulation Configuration Server
(LECS).
set bport_lec lecs_atm_address
ATM address
slot.lec