Filter
Top Products
2-254
SET TERMINAL BAUD
SET TERMINAL BAUD
Use the SET TERMINAL BAUD command to set the baud rate for a serial
(Console or Auxiliary) port. The baud rates of the serial port and the connected
device must match.
When using higher baud rates (19200 and 38400), enable Xon/Xoff flow
control on the connected device.
To connect a device that is set to a different baud rate than the serial port,
change the serial port baud rate to the baud rate used by the device as follows:
1
Set a terminal to 9600 baud and press Enter to access the DMM.
2
Enter the SET TERMINAL BAUD command to set the baud rate to your
specifications. After you set the new rate, you lose your connection to the
DMM.
3
Remove the terminal connection and connect the device that has the different
baud rate to resume your connection to the DMM or change the connected
device to the new baud rate.
4
Enter the SAVE TERMINAL command to save the new terminal setting.
Format
Example
The following command sets the Auxiliary port baud rate to 2400:
CB5000> set terminal auxiliary baud 2400
Terminal parameter changed.
Related Command
SHOW TERMINAL
set terminal
rate
baudconsole
auxiliary
console
Selects the Console port as the serial port for this operation.
auxiliary
Selects the Auxiliary port as the serial port for this operation.
rate Selects the baud rate for the Console or Auxiliary port.
rate = 300, 1200, 2400, 4800, 9600, 19200, 38400
The factory default setting is 9600.