Filter
Top Products
2-168
SET NETWORK TOKEN_RING MISMATCH_ RESOLUTION
SET NETWORK
TOKEN_RING
MISMATCH_
RESOLUTION
Use the SET NETWORK TOKEN_RING MISMATCH_RESOLUTION command to
allow CoreBuilder 5000 Token Ring Passive Media Modules to perform
address-to-port mapping when splitters and fan-out devices are used.
Mismatch resolution performs address-to-port mapping when you use a splitter
or fan-out device on a CoreBuilder 5000 Token Ring port. The SET NETWORK
TOKEN_RING MISMATCH_RESOLUTION command enables or disables the
mismatch resolution algorithm on the media cards for the specified network.
This setting is saved automatically, and is not affected by the SAVE or REVERT
commands.
Format
Example
The following command enables the mismatch resolution mechanism on
backplane network token_ring_3:
CB5000> set network token_ring token_ring_3 mismatch_resolution
enable
Value set to ENABLED.
Related Command
SHOW RING_MAP
set network token_ring mismatch_resolution
disable
enable
token_ring_1...
token_ring_10
isolated_1.slot...
isolated_10.slot
isolated.
slot
slot
Identifies the module for this operation for isolated networks.
disable
Disables mismatch resolution. Media cards do not attempt to resolve
the mapping to the port level
enable
Enables mismatch resolution. Media cards attempt address-to-port
mapping