Filter
Top Products
2-142
SET MODULE HOST_STATISTICS
SET MODULE
HOST_STATISTICS
Use the SET MODULE HOST_STATISTICS command to enable RMON host
statistics collection on an Ethernet Network Monitor Card (ENMC).
The SET MODULE HOST_STATISTICS command enables or disables RMON host
statistics collection on an Ethernet Network Monitor Card. Disabling RMON host
statistics collection frees ENMC resources for other tasks. The default setting is
disabled.
Format
Example
The following command enables RMON statistics collection on the ENMC in
subslot 4 of the DMM-EC in slot 15:
CB5000> set module 15.4 host_statistics enable
Rmon hosts table for module 15.04 set to ENABLE.
Related Commands
SET MODULE PROBE_MODE
SHOW RMON
set module
slot.subslot
host_statistics
enable
disable
slot.subslot Selects the ENMC on which you want to enable or disable RMON host
statistics collection. Valid values are hub slot 1 through 17, subslot 2
through 7.
Enables or disables RMON host statistics collection. Valid values are:
■
disable
■
enable