Filter
Top Products
SET TRUNK MODE
2-273
SET TRUNK MODE
Use the SET TRUNK MODE command to enable or disable the Ring-In and
Ring-Out ports on Token Ring modules.
Refer to the appropriate Token Ring Installation Guide for more information on
Ring-In and Ring-Out ports.
Format
Example
The following commands enable the Ring-In and Ring-Out ports of the Token
Ring module in slot 5 of the hub:
CB5000> set trunk 5 ring_in mode enable
Trunk 05.01 ring_in set to ENABLED.
CB5000> set trunk 5 ring_out mode enable
Trunk 05.01 ring_out set to ENABLED.
Related Commands
SHOW TRUNK
SET TRUNK COMPATIBILITY_MODE
slot Hub slot 1 through 17.
ring_in
Selects the Ring-In trunk for this operation.
ring_out
Selects the Ring-Out trunk for this operation.
.trunk port 1 or 2 (required only on Model Number 3CB6210M-OFR).
enable
Allows you to add a module to the ring.
disable
Deactivates the selected port.
set trunk
slot
ring_in
ring_out
mode
.trunk port
enable
disable