Filter
Top Products
SET VBRIDGE STP PRIORITY
2-297
SET VBRIDGE STP
PRIORITY
Use the SET VBRIDGE STP PRIORITY command to change the Spanning Tree
Protocol bridge priority value on a SwitchModule virtual bridge. The default
priority value is 32,768.
Refer to the CoreBuilder 5000 SwitchModule User Guide for more information
about Spanning Tree parameters.
Format
Example
The following command configures the virtual bridge 9 bridge priority value to
65,000:
CB5000> set vbridge 9 stp priority 65000
Priority for vbridge 9 set to 65000. Setting saved
Related Command
SHOW VBRIDGE CONFIGURATION VERBOSE
vbridge The assigned virtual bridge number. Values are 1 through 240.
priority Assigns the virtual bridge a Spanning Tree priority value for
becoming the root bridge. Values are 0 through 65535. Default
is 32768.
set vbridge
vbridge
stp
priority
priority