Filter
Top Products
SHOW RMON MATRIX DATA
2-375
SHOW RMON MATRIX
DATA
Use the SHOW RMON MATRIX DATA command to display information on
conversations between hosts on a network.
The matrix table is similar to the host table, but tracks network conversations
between hosts, instead of host traffic. For each frame, the MAC extracts the
source and destination address and associates the frame with a conversation.
Network conversations are important for performance modeling. Using matrix
table information, you can model the network across bridging devices and along
shared segments. You can optimize network performance by ensuring that heavy
conversations are isolated to shared LANs and do not occur across heavily
burdened bridging devices.
Format
Example
The following command displays the RMON Matrix Table for RMON Matrix Control
Table entry 3:
CB5000> show rmon matrix data 3
RMON Matrix display for Interface 3 :
Source Address : 00-00-0D-04-F9-5C
Destination Address: 00-00-F6-00-7F-E4
Index : 3
Packets : 130637
Octets : 9714430
Errors : 0
Related Commands
SET RMON MATRIX
SET MODULE INTERFACE
SHOW MODULE
selection
■
index (an entry from the RMON matrix control table)
■
involving mac address
■
by_insertion_order
■
all
show rmon matrix data
selection