Filter
Top Products
CLEAR COUNTER
2-11
CLEAR COUNTER
Use the CLEAR COUNTER command to reset to zero DMM counters or a specific
group of DMM counters.
The CLEAR COUNTER command does not affect counters reported by SNMP,
which are always stored as absolute values, as specified in the SNMP standard.
Format
network Any of the active available backplane or isolated Ethernet or Fast
Ethernet or Token Ring networks.
slot.port Selects a port to clear counters for. slot is the slot number (slot 1
through slot 17) and port is the port number (port 1 through port 4).
For example, to specify port 4 on the module in slot 6, enter
6.4
module.slot Specifies the module and the slot number in the hub.
clear counter
aft
ethernet
token_ring
repeater
rmon
all
ring_station
tr_mac_layer
tr_promiscuous
tr_source_routing
network
module
slot
network
port
slot.port
fast_ethernet
interface
ip_fragmentation
bridge_port
slot.port
slot
.all
ethernet
fddi_mac
fddi_port
interface
peak_rates
all
igmp_snooping
1 or 2
packet_channel
network
network
network
module
module
100BASE_X