Filter
Top Products
2-294
SET VBRIDGE STP BRIDGE_HELLO_TIME
SET VBRIDGE STP
BRIDGE_HELLO_TIME
Use the SET VBRIDGE STP BRIDGE_HELLO_TIME command to change the
Spanning Tree Protocol hello time value on a SwitchModule virtual bridge. The
default hello time value is 2 seconds.
Refer to the CoreBuilder 5000 SwitchModule User Guide for more information
about Spanning Tree parameters.
Format
Example
The following command configures the virtual bridge 9 hello time to 5 seconds:
CB5000> set vbridge 9 stp bridge_hello_time 5
Bridge Hello Time for vbridge 9 set to 5 seconds. Setting saved.
Related Command
SHOW VBRIDGE CONFIGURATION VERBOSE
vbridge The assigned virtual bridge number. Values are 1 through 240.
hello time Assigns a Spanning Tree hello time to the virtual bridge. Values
are 1 through 9.
set vbridge
vbridge
stp
bridge_hello_time
hello time