Filter
Top Products
SET MODULE MAXIMUM_VBRIDGE
2-151
SET MODULE
MAXIMUM_VBRIDGE
Use the SET MODULE MAXIMUM_VBRIDGE command to adjust the maximum
number of virtual bridges you can use on a CoreBuilder 5000 SwitchModule.
The max vbridge values you can assign depend in part on the memory model
setting you configure for the Switchmodule. If you set memory model to Small,
you cannot set max vbridge to 256. All other max vbridge assignments are valid
for any memory model setting.
To assign a max vbridge value of 256, the SwitchModule must have an installed
8 MB or 16 MB memory upgrade SIMM.
You must save the setting and reboot the SwitchModule for the change to take
effect.
For more information about configuring the maximum vbridge value, refer to
the
CoreBuilder 5000 SwitchModule User Guide.
Format
Example
The following command configures module 6 to the specified vbridge setting.
You must reset the SwitchModule using the RESET MODULE command for the
maximum vbridge change to take effect. The system displays the warning
message in the example to remind you to reset the module.
CB5000> set module 6.1 maximum_vbridge 256
Administrative Maximum Vbridge set to 256
Warning:
change does not take effect until module is reset.
CB5000> save all
Related Commands
SHOW MODULE
SET MODULE MEMORY_MODEL
slot.
1
Slot containing the SwitchModule you are configuring.
max vbridge Value that is a power of 2. The following values are valid: 1, 2, 4, 8,
16, 32, 64, 128, and 256.
The default setting is 32.
set module
slot.
1
maximum_vbridge
max vbridge