Filter
Top Products
2-94
SET BPORT_MAU MODE
Format
Example
This command disables mau2 on port 4.1:
CB5000> set bport_mau 4.1.2 mode disable
Mau 04.01.02 Admin State set to DISABLED.
For the changes to take effect, you must save the configuration and reset the
SwitchModule. When you reset the SwitchModule, it reconfigures as one logical
bridge port (port 4.1) on which two MAUs exist.
To determine which portmau is primary or secondary, enter the SHOW
BPORT_MAU VERBOSE command and examine the General Information field.
Related Command
SHOW BPORT_MAU VERBOSE
set bport_mau mode
disable
enable
slot.
all
slot.port.mau
backup
primary
slot.port.mau Identifies the MAU for this operation.
slot (1 through 17) is the slot number and port (1 through 24) is the
port number. The mau variable may be 1 or 2 (for redundant ports).
For example, to identify mau 1 of port 4 on the module in slot 6,
enter
6.4.1
slot.
all
Specifies that all MAUs in the slot are affected by this operation.
disable
Disables the port MAU.
enable
Enables the port MAU. This is the default setting when you install the
module.