Filter
Top Products
2-114
SET DEVICE RESET_MASTERSHIP
SET DEVICE
RESET_MASTERSHIP
Use the SET DEVICE RESET_MASTERSHIP command to determine if the DMM
causes a mastership election when inserted into a hub. Because the setting is
stored in non-volatile RAM, you can set this option in one hub, and set it to
take effect when you insert the module in a second hub.
Format
Example
The following command causes the DMM to force a mastership election if the
DMM is removed and inserted into any hub:
CB5000> set device reset_mastership enable
RESET MASTERSHIP option enabled.
Related Commands
SAVE DEVICE
SHOW DEVICE
set device reset_mastership
enable
disable
enable
DMM forces a mastership election when introduced into a hub. This may be
useful if you want the module you are inserting to become the hub master.
disable
DMM does not force a mastership election. This setting ensures that the
DMM is a slave when inserted into a hub. This is the default.