Filter
Top Products
2-90
SET BPORT_MAU HIGH_POWER
SET BPORT_MAU
HIGH_POWER
Use the SET BPORT_MAU HIGH_POWER command to configure high or normal
power transmission levels on a 10BASE-FB/FL SwitchModule MAU. By default,
10BASE-FB/FL SwitchModule MAUs transmit at the normal power setting.
Format
Example
The following command enables high power transmission on mau 1 of port 3
on a 10BASE-FB/FL SwitchModule in slot 5:
CB5000> set bport_mau 5.3.1 high_power enable
Related Command
SHOW BPORT_MAU
slot.port.mau Identifies the MAU for this operation.
slot is the slot number and port (1 through 20) is the port number.
Use 1 as the mau variable. For example, to identify MAU 1 on port 4
on the module in slot 6, enter
6.4.1
slot.
all
Specifies that all MAUs in the slot are affected by this operation.
disable
Disables high power and enables normal power.
enable
Enables high power and disables normal power.
slot.
all
set bport_mau high_power
disable
enable
slot.port.mau