Filter
Top Products
2-358
SHOW PORT
SHOW PORT
Use the SHOW PORT command to display the mode and status of all ports or a
specific port.
Format
Example for Ethernet
The following command displays summary status for all ports on the module in
slot 2:
CB5000> show port 2.all no_verbose
Port Display for Module 6120M-TPP :
Port Mode Status Network General Information
----- -------- ------------------- ---------------------------------
02.01 ENABLED LINK FAILURE ETHERNET_1
02.02 ENABLED LINK FAILURE ETHERNET_1
02.03 ENABLED LINK FAILURE ETHERNET_1
02.04 ENABLED LINK FAILURE ETHERNET_1
02.05 ENABLED LINK FAILURE ETHERNET_1
02.06 ENABLED LINK FAILURE ETHERNET_1
02.07 ENABLED LINK FAILURE ETHERNET_1
02.08 ENABLED LINK FAILURE ETHERNET_1
02.09 ENABLED LINK FAILURE ETHERNET_1
02.10 ENABLED LINK FAILURE ETHERNET_3
02.11 ENABLED LINK FAILURE ETHERNET_1
02.12 ENABLED LINK FAILURE ETHERNET_1
02.13 ENABLED LINK FAILURE ETHERNET_1
02.14 ENABLED LINK FAILURE ETHERNET_2
02.15 ENABLED LINK FAILURE ETHERNET_2
02.16 ENABLED LINK FAILURE ETHERNET_2
02.17 ENABLED LINK FAILURE ETHERNET_2
02.18 ENABLED LINK FAILURE ETHERNET_2
02.19 ENABLED LINK FAILURE ETHERNET_2
02.20 ENABLED LINK FAILURE ETHERNET_2
show port
no_verbose
verbose
slot.port
slot.
all
all
slot.port Selects a port for this operation.
slot (1 through 17) is the module location in the chassis and port
(1 through 20) is the port number. For example, to select port 4 on the
module in slot 6, enter
6.4
slot.
all
Displays information for all ports on the module in the selected slot.
all
Displays information about all ports on all modules.
verbose
Displays extended information.
no_verbose
Displays summary information.