Filter
Top Products
SHOW VBRIDGE CONFIGURATION
2-415
SHOW VBRIDGE
CONFIGURATION
Use the SHOW VBRIDGE CONFIGURATION command to display information about
virtual bridges on CoreBuilder 5000 SwitchModules.
Format
Example
The following command displays configuration information about virtual
bridge 25:
CB5000> show vbridge 25 configuration verbose
VBridge Bridge Identifier Ports Spanning Tree General Information
------- ---------------------------- ------------- ----------------
25 80-00-08-00-8f-11-1a-5a2 DISABLED vbridge_25
Interface Number: NONE
Interface Mode: N/A
Aging Time: 300
Learned Entry Discards: 0
Spanning Tree Priority: 32768
Spanning Tree Bridge Max Age: 20.00
Spanning Tree Bridge Forward Delay: 15.00
Spanning Tree Bridge Hello Time: 2.00
Spanning Tree Hold Time: 1.00
Spanning Tree Max Age: 20.00
Spanning Tree Hello Time: 2.00
Spanning Tree Forward Delay: 15.00
Designated Root: 80-00-08-00-8f-11-1a-5a
Root Cost: 0
Root Port: 0
Topology Changes: 0
Time Since Topology Changed: 667395.26
show vbridge
vbridge
no_verboseconfiguration
verbose
vbridge The virtual bridge (1 through 256) about which you want to display
information. You must enter the number of a defined virtual bridge.
no_verbose
Displays:
■
Virtual bridge number
■
Virtual bridge identifier
■
Number of ports assigned to the virtual bridge
■
Spanning Tree state
■
General information (such as name)
If you do not enter the VERBOSE option, NO_VERBOSE is the default.
verbose
Displays the information shown by the NO_VERBOSE option, plus
Spanning Tree parameters for the virtual bridge.