Filter
Top Products
SHOW LOG MODULE EVENT_LOG
2-347
SHOW LOG MODULE
EVENT_LOG
Use the SHOW LOG MODULE EVENT_LOG command to display the event log
for the SwitchModule in the specified slot. If no information currently exists, the
following message is displayed:
Module Event Log empty - no event to display.
If a module other than a SwitchModule is selected, the following message is
displayed (for example, if you specified slot 8).
show module log 8
Module in slot 8 does not support this feature.
This command supports SwitchModules only, running Version v1.10 or higher.
Format
Example
If there was a crash on a particular SwitchModule, a screen dump is displayed.
The following command displays the event log:
CB5000>
show log module 2 event_log
Module Sys Up Time at Crash: 1679
Ack Date/Time: 17:36 Tue 01 Oct 96
- 0 - - 1 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 -
A = 02010000 040CB740 040CB484 040CB5EC 00077E02 040386D8 040CB42C 040CB3DC
D = 00000087 00000002 00000087 02010000 00000000 00000000 00000005 00000000
Vector = 7008 PC = 00077E4C SR = 3010
Stack Dump:
40CB3DC 30 10 00 07 7E 4C 70 08 - 04 0C B4 28 00 C5 00 85 0....Lp.........
40CB3EC 00 45 00 C5 02 01 00 00 - 04 0C B4 1C 00 00 00 87 .E..............
40CB3FC 02 01 00 00 00 00 00 87 - 02 01 00 00 00 87 00 00 ................
40CB40C 04 03 2B 40 00 12 50 32 - 04 0C B4 38 00 11 C6 A0 ......P2...8....
40CB41C 00 00 00 01 00 00 00 0D - 04 0C B4 84 04 0C B4 5C ................
40CB42C 00 07 EC 4E 04 0C B4 84 - 00 00 00 01 00 00 00 01 ...N............
40CB43C 00 00 00 00 00 00 00 00 - 00 00 00 00 04 0C B5 EC ................
40CB44C 00 00 00 00 00 00 00 00 - 00 00 00 00 04 0C B5 D8 ................
Related Command
CLEAR LOG EVENT_LOG
slot
show log module
event_log