Filter
Top Products
2-378
SHOW ROVING_ANALYSIS_ PORT
SHOW
ROVING_ANALYSIS_
PORT
To display information about the roving analysis configuration, use the SHOW
ROVING_ANALYSIS_PORT commands.
The system output that is displayed when you enter these commands contains the
following columns:
■
System-Analyzer
— Shows whether a SwitchModule is configured to receive
mirrored traffic.
■
Analyzer
— Shows where the mirrored traffic is being sent for analysis.
■
Monitor-Source
— Lists the bridge port whose traffic is being mirrored (source
port).
Format
Example 1
The following example shows roving analysis information for all SwitchModules in
the hub, use the SHOW ROVING_ANALYSIS_PORT command with the HUB_INFO
option:
In the previous example:
■
The SwitchModule in slot 7 is enabled as the system analyzer. It is receiving
mirrored traffic from bridge port 8.2, the monitor-source, and sending the
mirrored traffic out bridge port 7.3 for analysis.
■
Bridge port 14.1 is configured to mirror traffic locally to its own processor.
show roving_analysis_port hub_info
system_analyzer_info
hub_info
Option to use when you want to show roving analysis
information for all SwitchModules in the hub
system_analyzer_info
Option to use when you want to display information about the
SwitchModule configured as the system analyzer
> show roving_analysis_port hub_info
Slot Module System-Analyzer Analyzer Monitor-Source
----- --------------------------- ---------------- --------------
03.1 6604M-F DISABLED NONE NONE
04.1 6612M-TP DISABLED NONE NONE
07.1 6604M-TX ENABLED BRIDGE PORT 3 BRIDGE PORT 8.2
08.1 6604M-TX DISABLED SYSTEM ANALYZER
13.1 6612M-TP DISABLED NONE NONE
14.1 6614M-FTP ENABLED PROCESSOR BRIDGE PORT 14.01
16.1 6604M-F DISABLED NONE NONE
17.1 6604M-F DISABLED NONE NONE