Filter
Top Products
SET PROTOCOLS TRANSLATION
2-209
SET PROTOCOLS
TRANSLATION
Use the SET PROTOCOLS TRANSLATION command to select the setting for
translation between the Ethernet and FDDI protocols on CoreBuilder 5000
SwitchModules.
Format
Example
The following command enables ipx802.3 translation on the SwitchModule in
slot 17:
CB5000> set protocols 17.1 translation ipx8023
Filter set.
Related Command
SHOW PROTOCOLS TRANSLATION
slot.
1
Selects a slot (1 through 17) for setting protocol forwarding. Subslot is
always
1
.
ipx8023
Enables translation using the ipx8023 setting. Select this setting if your
network is running Novell configured as raw 802.3 IPX between
Ethernet and FDDI.
default
Enables translation at the default setting. Select this setting if your
network is running Novell
configured as Ethernet II or Ethernet
802.3/802.2 between Ethernet and FDDI.
set protocols
default
slot.
1
translation
ipx8023