Filter
Top Products
2-318
SHOW BPORT_LEC STATUS
SHOW BPORT_LEC
STATUS
Use the SHOW BPORT_LEC STATUS command to display the status for the
specified LAN Emulation Client (LEC).
BPORT is an abbreviation for Bridge Port.
LEC ports are logical ports, all of which overlay one physical ATM/Synchronous
Optical Network (SONET) port.
Format
Example
The following command displays the status for the specified LEC:
CB5000> show bport_lec 4.1 status
BP LEC Mode Status General Info
------ -------- ------------ -----------------
04.01 ENABLED OKAY
Actual ELAN Name: LANE32
Actual ELAN Type: 802.3
Actual Maximum Data Frame Size: 1516
LECS ATM Address:
39.99.99.99.ac.00.00.00.00.99.99.01.02.03.04.05.06.07.08.00
LECS Address Source: ILMI SERVICE REGISTRY MIB
Actual LES ATM Address:
39.00.99.99.99.99.ac.00.99.99.99.99.99.99.99.99.99.99.99.99
LEC ID: 17
Interface State: OPERATIONAL
Last Failure Response code: NONE
Last Failure State: INITIAL
LANE Protocol: 1
LANE Version: 1
Topology Change: OFF
Proxy Client: YES
LEC ATM Address:
39.00.00.99.99.00.00.00.00.99.99.01.02.03.04.05.06.07.08.00
Refer to the ATM Backbone SwitchModule User Guide for definition of terms
and additional information.
Related Command
SHOW BPORT_LEC CONFIGURAtION
slot.lec Identifies the slot and LEC for this operation.
slot (1 through 17) is the slot number and
lec is one of up to 64 LAN
Emulation Clients defined as logical ports for the ATM Backbone
SwitchModule. For example, to identify LEC 32 on the ATM Backbone
SwitchModule in slot 4, enter
4.32
show bport_lec
slot.lec
status