Filter
Top Products
2-300
SHOW ALERT BRIDGE_PORT
SHOW ALERT
BRIDGE_PORT
Use the SHOW ALERT BRIDGE_PORT command to display the settings of the
bridge_port up/down and STP state alert filters. If the filter is set to enabled, a
trap is not generated. The factory setting is ENABLED, filter out traps.
Format
Example
The following command displays information about the bridge port alert filter
settings for bridge port 3.1:
CB5000> show alert bridge_port 3.1
BPort Port Up Down Trap Stp State Trap
----- ------------------ ----------------
03.01 ENABLED ENABLED
Related Command
SET ALERT
slot.port
show alert bridge_port
slot.
all
all
slot.port Identifies the bridge port for which you want to show settings.
slot (1 through 17) is the slot number for the module.
port (1 through 24) is the bridge port number on the module.
slot.
all
Displays information about all bridge ports on the module in the
slot (1 through 17).
all
Displays information about all bridge ports in the hub.