Filter
Top Products
2-72
SET BPORT_LEC CONFIG_MODE
SET BPORT_LEC
CONFIG_MODE
Use the SET BPORT_LEC CONFIG_MODE command to specify how the LAN
Emulation Client (LEC) port acquires its LAN emulation configuration parameters
– automatically or manually.
BPORT is an abbreviation for Bridge Port.
LEC ports are logical ports, all of which overlay one physical ATM/Synchronous
Optical Network (SONET) port.
Format
Example
The following command sets the LEC in slot 4, port 1 to automatically configure
from a LECS:
CB5000> set bport_lec 4.1 config_mode automatic
Bridge Port 04.01 parameter set.
Related Command
SHOW BPORT_LEC CONFIGURATION
slot.lec Identifies the slot and LEC for this operation.
slot (1 through 17) is the slot number and
lec is one of up to 64 LAN
Emulation Clients defined as logical ports for the ATM Backbone
SwitchModule. For example, to identify LEC 32 on the ATM Backbone
SwitchModule in slot 4, enter
4.32
automatic
Specifies that the LEC attempts to acquire its LAN emulation configuration
parameters from a LAN Emulation Configuration Server (LECS).
manual
Specifies that the LEC’s LAN emulation parameters are configured locally.
set bport_lec config_mode
automatic
manual
slot.lec