Filter
Top Products
SET ATM VPI_VCI_BITS
2-67
SET ATM VPI_VCI_BITS
Use the SET ATM VPI_VCI_BITS command to specify the number of valid bits for
the Virtual Path Identifier/Virtual Channel Identifier (VPI/VCI) field. The total
number of VPI and VCI bits must not exceed 9.
Format
Example
The following command sets the ATM VPI bits to 3 and the VCI bits to 8:
CB5000> set atm 4 vpi_vci_bits 3/8
Slot 04 parameter set.
Warning: Change does not take effect until module is reset.
Related Command
SHOW ATM ILMI CONFIGURATION
slot Identifies the slot for this operation.
slot (1 through 17) is the slot number.
vpi/vci Choose the number of valid bits for the Virtual Path Identifier/Virtual
Channel Identifier (VPI/VCI) field. You can choose from one of the
following ranges:
■
0 through 9
■
1 through 8
■
2 through 7
■
3 through 6
The default value is 0 for VPI and 9 for VCI.
set atm
vpi_vci_bits
slot
vpi/vci