Filter
Top Products
SET VBRIDGE IGMP_SNOOPING QUERY RESET_TO_DEFAULT
2-289
SET VBRIDGE
IGMP_SNOOPING
QUERY
RESET_TO_DEFAULT
Use the SET VBRIDGE IGMP_SNOOPING QUERY RESET_TO_DEFAULT command
to reset the IGMP snooping query parameters to their factory defaults.
Format
Example
The following command sets slot 8, port 1 on virtual bridge 12 as a router port:
CB5000> set vbridge 12 igmp_snooping query reset_to_default 8.1
Related Commands
SET VBRIDGE IGMP_SNOOPING MODE
SET VBRIDGE IGMP_SNOOPING GROUP AGE_TIME
SET VBRIDGE IGMP_SNOOPING PORT AGE_TIME
SET VBRIDGE IGMP_SNOOPING QUERY_INTERVAL
SET VBRIDGE IGMP_SNOOPING QUERY LISTEN_TIME
SET VBRIDGE IGMP_SNOOPING QUERY MODE
SET VBRIDGE IGMP_SNOOPING ROUTER_PORT
vbridge The assigned virtual bridge number. Values are 1 through 240.
slot.port Specifies the slot and port for this operation. port (1 through 24) is a
multicast port.
set vbridge
vbridge
igmp_snooping
reset_to_default
query
slot.port