Filter
Top Products
2-70
SET BOOTP SERVER_IP_ADDRESS
SET BOOTP
SERVER_IP_ADDRESS
Use the SET BOOTP SERVER_IP_ADDRESS command to define the BootP server
IP address to which the DMM sends BootP requests. If you do not specify an IP
address, the DMM sends the request to the broadcast address.
Format
Example
The following command specifies that the DMM send BootP requests to IP
address 127.3.6.58:
CB5000> set bootp server_ip_address 127.3.6.58
BootP IP address set to 127.3.6.58.
Related Commands
CLEAR BOOTP
SET BOOTP POWER_UP_MODE
SHOW BOOTP
ip address IP address of the BootP server. Enter the address as a series of four
decimal bytes separated by periods. For example, 192.122.19.4.
The factory setting is 255.255.255.255, which is a broadcast address.
set bootp server_ip_address
ip address