Filter
Top Products
SET MODULE PER_ PORT_COUNTERS_ CONNECTOR
2-157
SET MODULE PER_
PORT_COUNTERS_
CONNECTOR
Use the SET MODULE PER_PORT_COUNTERS_CONNECTOR command to select
which connector to monitor ports statistics on for the 3Com ONline 24-Port
10BASE-T Module.
Format
Example
The following command sets the per-port counters connector to 2 on the
ONline 24-Port 10BASE-T Module in slot 3.1:
CB5000> set module 3.1 per_port_counters_connector 2
Module 3 port counters set to Connector 2.
Related Commands
SET MODULE CONNECTOR NETWORK
SHOW MODULE
slot.subslot The slot of the module that you are configuring.
slot
(1 through 17)
is the slot number for the module in the hub and
subslot
is the subslot number on the module in the specified slot.
connector The number of the connector (1 or 2) whose per-port statistics you
want to monitor.
set module
slot.subslot
per_port_counters_connector
connector