Filter
Top Products
SET SECURITY PORT MODE
2-237
SET SECURITY PORT
MODE
Use the SET SECURITY PORT MODE command to enable or disable address
security for a specified port.
If you enable security mode for a port that does not have MAC addresses
associated with it, the DMM treats each packet as an intrusion.
Format
Example
The following command enables security on port 2 in slot 3:
CB5000> set security port 3.2 mode enable
Port 03.02 security mode set to ENABLED.
Related Command
SET SECURITY PORT MAC_ADDRESS
set security port
slot.port
mode
slot
.all
disable
enable
slot.port Identifies the port for this operation.
slot (1 through 17) is the location of a module in the hub and port is
the port number on the specified module. For example, to identify
port 4 on the module in slot 6 enter
6.4
slot.
all
Specifies all ports on a module in a slot.
disable
Disables security mode for the specified port.
enable
Enables security mode for the specified port.