Filter
Top Products
SET VBRIDGE AFT BRIDGE_PORT
2-279
SET VBRIDGE AFT
BRIDGE_PORT
Use the SET VBRIDGE AFT BRIDGE_PORT command to enable source checking
for all MAC addresses of devices attached to a port. Before forwarding any
packet that arrives on the specified port, the SwitchModule checks the address
table to verify that the packet’s source MAC address is valid for the specified
port.
Format
vbridge 1 through 240. The assigned virtual bridge number.
slot.port slot is 1 through 17. port is 1 through 24. The command affects all
entries in the address table associated with this bridge port.
slot
.all
slot is 1 through 17. The command affects all entries in the address
table associated with all bridge ports on this SwitchModule.
all
Specifies that the command affects all learned and user-created (mgmt)
addresses in the virtual bridge’s address table.
learn
Specifies that the command affects all addresses learned by the
SwitchModule in the virtual bridge’s address table.
mgmt
Specifies that the command affects all user-created addresses in the
virtual bridge’s address table.
persistence
Specifies the length of time you want an address entry or set of entries
to remain in the virtual bridge’s address table.
age
The address entry ages out of the address table during the next virtual
bridge aging process. This is the default setting for learned address
entries.
noage
The address entry remains in the address table until you reboot the
SwitchModule. The aging process does not affect the entry.
permanent
The address entry remains in the address table permanently, even after
you reboot the SwitchModule.
source_check
Specifies a filter that filters according to packet source MAC address.
Use this option to "lock down" an address or set of addresses to a
particular port.
disable
Disables source checking for the entry or set of entries you specify.
enable
Enables source checking for the entry or set of entries you specify.
set vbridge
vbridge
aft bridge_port
all
learn
mgmt
persistence
source_check
age
noage
permanent
disable
enable
slot.port