Filter
Top Products
2-130
SET MODULE ANALYZER
SET MODULE
ANALYZER
Use the SET MODULE ANALYZER command when setting up a roving port
analysis configuration on a CoreBuilder 5000 SwitchModule. The SET MODULE
ANALYZER command specifies the port or processor you want to use as the
analyzer (destination) for mirrored traffic.
Format
Example
The following command configures port 2 on the SwitchModule in slot 6 as the
analyzer:
CB5000> set module 6.1 analyzer local_port 2
Module 06 Analyzer set to BRIDGE PORT 2
Related Commands
SET BRIDGE_PORT MONITOR
SET MODULE SYSTEM_ANALYZER
SHOW MODULE
slot.
1
1 through 17. Indicates the slot number of the module you are
configuring.
local_port
Specifies that the module mirrors packets to a port on the same
module.
port 1 through 24. Specifies the port you want to define as the local_port.
analyzer
Specifies that the module mirrors traffic across the PacketChannel
backplane to the port you enable as the system analyzer.
processor
Specifies that the module mirrors traffic to across the PacketChannel
backplane to the SwitchModule processor you enable as the system
analyzer.
none
Specifies no traffic.
set module
slot.
1
analyzer
local_port
system_analyzer
processor
none
port