3Com 5104M-FIB Switch User Manual


 
2-330
SHOW COUNTER
The following table describes Token Ring (DOT5) Interface Ring Status
information:
Field Text Hex Code Description
No Problems Detected 00000000 No problems detected at this time.
Ring Recovery 00000020 TR-NMC is transmitting or receiving Monitor
Contention frames.
Single Station 00000040 TR-NMC is opened onto the ring, but is the only
station on the ring.
Remove Received 00000100 TR-NMC has received a Removed MAC frame.
Auto-Removal Error 00000400 Auto-removal error detected.
Lobe Wire Fault 00000800 TR-NMC has detected a wire fault.
Transmit Beacon 00001000 TR-NMC is transmitting beacon frames.
Soft Error 00002000 TR-NMC has transmitted a Soft Error Report
MAC Frame. If any of the DOT5 statistics
counters are increasing, it indicates that the
TR-NMC has sent one or more Soft Error Report
MAC Frames.
Note
: The TR-NMC clears this condition after a
short period.
Hard Error 00004000 TR-NMC is either transmitting or receiving
beacon frames.
Signal Loss 00008000 TR-NMC has detected the absence of a receive
signal.
No Status 20000000 TR-NMC open process in progress, but not
completed.