Filter
Top Products
CLEAR PROTOCOLS
2-21
CLEAR PROTOCOLS
Use the CLEAR PROTOCOLS command to remove a protocol filter from an
CoreBuilder 5000 SwitchModule.
Format
Example
The following command deletes the filter for Ethernet DECnet Phase IV packets
from the protocol forwarding table:
CB5000> clear protocols 4.1 enet 60-03
Filter cleared.
Related Commands
SET PROTOCOLS FORWARDING
SHOW PROTOCOLS
clear protocols
dsap
enet
slot.
1
snap
type field
slot
.1
Identifies the SwitchModule that is affected by this command.
dsap
Delete a filter for packets with the protocol type DSAP.
enet
Delete a filter for packets with the protocol type Ethernet.
snap
Delete a filter for packets with the protocol type SNAP (SubNetwork
Access Protocol).
type field Specifies the type field of the protocol filter you are deleting.