Filter
Top Products
A
BOUT
T
HIS
G
UIDE
Introduction
This guide describes the commands used to manage 3Com devices in the 3Com
CoreBuilder
®
5000 Integrated System Hub, using the CoreBuilder 5000
Distributed Management Module (DMM) interface. Use this guide to find specific
information about hub management commands available from the DMM
command-line parser. Refer to the CoreBuilder 5000 Distributed Management
Module User Guide for instructions on installing, configuring, and using the
module.
If the information in the release notes shipped with your product differs from the
information in this guide, follow the release note instructions.
Audience
This guide is intended for the following people at your site:
■
Network manager or administrator
■
Trained hardware installer or service personnel
How to Use This Guide
Table 1 shows the location of specific information.
Conventions
Table 2 and Table 3 list conventions used throughout this guide.
Table 1
How to Use This Guide
If you are looking for Turn to
An overview of the DMM command line parser Chapter 1
A comprehensive list of commands available for managing hubs
using the DMM command line interface
Chapter 2
Instructions for contacting the 3Com technical support
organization and for accessing other product support services
Appendix A
Table 2
Graphic Conventions
Icon Notice Type Alerts you to
Information note Important features or instructions
Caution Risk of personal safety, system damage, or loss of data
Warning Risk of severe personal injury