Filter
Top Products
SHOW TR_SURROGATE REM_SOFT_ERROR
2-407
SHOW
TR_SURROGATE
REM_SOFT_ERROR
Use the SHOW TR_SURROGATE REM_SOFT_ERROR command to show a count of
REM non-isolating soft error data. The REM Soft Error Statistics table provides a
cumulative count of non-isolating soft error counters.
Format
Example
The following command shows REM soft error data for the TR-NMC in slot 11.2:
CB5000> show tr_surrogate 11.2 rem_soft_error
Ring Error Monitor Total Soft Error Data for Network TOKEN_RING_1
--------------------------------------------------------------------
Lost Frame Errors: 0
Receiver Congestion Errors: 0
Frame Copied Errors: 0
Token Errors: 0
Table Full Conditions: 0
Minimum Decrement Exceeded Conditions: 0
Receiver Congestion Table-Full Conditions: 0
Related Command
SET TR_SURROGATE
show tr_surrogate
slot.
2
rem_soft_error
slot.
2
The slot ID for the module that you selected for the operation. The
number can be from 1 through 17. The subslot is always 2.
Field Description
Lost Frame Errors Total lost frames reported to the REM.
Receiver Congestion Errors Total receive congestion errors reported to the REM. Receive
congestion errors may indicate that the TR-NMC is being
overloaded by incoming traffic.
Frame Copied Errors Total frame copied errors reported to the REM.
Frequency Errors Total frequency errors reported to the REM.
Token Errors Total token errors reported to the REM.
Table Full Conditions Total table full conditions reported by the REM.
Minimum Decrement Exceeded
Conditions
Total number of times that the REM attempted to set its
decrement value below the minimum value allowed.
Receiver Congestion Table-Full
Conditions
Total number of receiver congestion table full conditions
reported by the REM.