Filter
Top Products
2-396
SHOW TFTP
SHOW TFTP
Use the SHOW TFTP command to display TFTP parameter values.
Format
Example
The following command displays TFTP values:
CB5000> show tftp
--- TFTP Variables: ---
TFTP Server IP Address: 127.0.0.1
TFTP File Name: image
TFTP Result: OKAY
show tftp
TFTP Result Definition
CLEAR User cleared the previous value in this field (CLEAR TFTP
command).
TRANSFER IN PROGRESS TFTP file transfer is in progress.
OKAY TFTP file transfer completed successfully.
UNDEFINED TFTP ERROR Undefined TFTP error.
FILE NOT FOUND The TFTP server could not find the file.
ACCESS ERROR The TFTP server could not access the file.
DISK FULL Upload error only.
NO RESPONSE FROM SERVER The TFTP server did not respond to the request.
INVALID DOWNLOAD KEY The download key entered as part of a licensed software
upgrade is invalid.
FEPROM ERASE ERROR The hub receiving the download reported an error. Retry the
download. If the error recurs, the hub requires servicing.
FEPROM PROGRAM ERROR The hub receiving the download reported an error. Retry the
download. If the error recurs, the hub requires servicing.
TFTP TRANSFER ERROR An error occurred during the transfer. Retry the download.
DOWNLOAD DECODE ERROR The file on the server may be corrupt.
DOWNLOAD FAILED The download failed. Retry the download.
CRC ERROR The download failed. Retry the download.
FILE TOO LARGE FOR
MEMORY
An incorrect file was specified.
GATEWAY UNREACHABLE The hub received was unable to communicate with the default
gateway.
Make sure the default gateway IP address is set correctly (SHOW
DEVICE command). Make sure the default gateway is operating
correctly.
MODULE TYPE INCORRECT You specified an incorrect module type for the file you are trying
to download.
FILE TYPE INCORRECT You specified an incorrect file.
TIMEOUT WAITING FOR PKT An error occurred on the network. Retry the download.