Filter
Top Products
DOWNLOAD OUT_OF_BAND
2-37
DOWNLOAD
OUT_OF_BAND
Use the DOWNLOAD OUT_OF_BAND command to load new software onto the
DMM. An out-of-band download uses XMODEM and takes place over a serial
connection between a personal computer and the console port on the DMM.
Traffic statistic collection and display features are disabled during a download.
These features restart automatically after the download completes successfully.
Any network function (such as Ping and Telnet) that attempts to communicate
with a DMM will not succeed until the download completes successfully and the
DMM reinitializes.
Do not use the RESET MASTERSHIP command during a download.
Format
module
Specifies download to a particular module in the hub.
device
Specifies download to the DMM.
all
Specifies download to all modules of the selected type.
boot
Specifies a download of boot code.
operational
Specifies a download of operational code.
trchipset
Specifies a download of chipset code to the TR-NMC module.
ascii
Specifies a download of an ASCII script file.
configuration
Specifies a download of a binary configuration file. This command applies
to the DMM only.
module The module type that you want to download code to. Only certain 3Com
CoreBuilder
®
5000
modules support this operation.
slot.subslot The location of the module where you want to download the new code.
download out_of_band
boot
operational
module
device
boot
operational
trchipset
slot.subslot
boot
operational
all
module