Filter
Top Products
MONITOR
2-41
MONITOR
Use the MONITOR command to view ongoing network statistics. This command
displays statistics for a device, network, or port. The display is updated
periodically based on the number of minutes and seconds you assign. Press
Ctrl+C to discontinue this process and return to the management prompt.
The MONITOR command reports information similar to the SHOW COUNTER
command display except that the MONITOR command display captures events
only at the time of request. The information displayed by the SHOW COUNTER
command is current. Refer to the SHOW COUNTER commands for descriptions
of the displays.
Format
interval The system-specified range of time allotted for monitoring is
00 through 30 minutes (mm) and 05 through 59 seconds (ss). Use
these ranges when specifying a length of time to monitor your
network.
slot.port Specifies
the slot (1 through 17, 1 through 10, or 1 through 7) and
port (1 through 40) you want to monitor.
network Indicates the type and number of network to monitor:
■
ethernet_1 through ethernet_8
■
fast_ethernet_1 through fast_ethernet_4
■
isolated
vbridge Specifies the SwitchModule virtual bridge (1 through 240) you want to
monitor.
monitor
interval
slot.port
vbridge
bridge_port
vbridge
ethernet
interface
repeater
rmon
token_ring
ethernet
interface
network
fddi_port
fddi_mac
ring_station
tr_mac_layer
tr_promiscuous
tr_source_routing
network
network
network
1 or 2
fast_ethernet
network
100BASE_X
module
port
slot