Filter
Top Products
2-344
SHOW IP
SHOW IP
Use the SHOW IP command to display Internet Protocol information for the
networks configured in the hub.
Format
Example
The following command displays IP information on DMM network interfaces:
CB5000> show ip all
Active Default Gateway : 151.104.4.1
Operational Active Default Gateway: 151.104.4.1
Index Network Slot IP Address Subnet Mask Default Gateway
----- ------------- ---- ----------- ----------- ----------------
1 ETHERNET_1 N/A 151.104.4.255 ff.ff.ff.00 151.104.4.1
2 TOKEN_RING_1 N/A 151.106.7.32 ff.ff.ff.00 151.106.7.254
3 VBRIDGE 1 N/A 151.107.9.99 ff.ff.ff.00 151.107.9.2
IP ARP Cache:
Interface Address Physical Address
--------- --------- ----------------
5 151.104.99.1 00-00-30-20-9e-5a
6 151.104.94.42 10-00-5a-f2-54-33
6 151.104.94.46 10-00-5a-f2-80-67
all
Show all IP parameters.
arp_cache
Show the DMM’s current ARP cache.
election_priority
Show the DMM’s current Vbridge IP relay election slot priority.
route_table
Show the DMM’s routing table.
show ip
all
arp_cache
election_priority
route_table