Filter
Top Products
2-342
SHOW INVENTORY
SHOW INVENTORY
Use the SHOW INVENTORY command to display hub inventory information. This
list includes the hub, all modules and submodules, and the controller module.
The SHOW INVENTORY command displays Jitter Attenuator cards, even though
they are not manageable cards. Inventory information is provided for power
budgeting.
Format
Example
The following command shows the inventory for a DMM:
CB5000>
show inventory verbose
HUB/ Hardware
Slot Module Version Serial # Vendor Date
----- ------------- ---------- ---------- -------- --------
HUB 6 017C 123456 3Com 930914
12.01 5103M-AUIM N/A N/A N/A N/A
Note Pad: N/A
Operational EPROM Version: 001 Boot EPROM Version: 1.00
14.01 6106M-MGTv1.00 23456 3Com 931027
Note Pad: Carrier Card Installed 3/6/95
Operational EPROM Version: 1.00 Boot EPROM Version: 1.00
DMM: Operational EPROM Version: 1.00 Boot EPROM Version: 1.00
14.02 6100D-MAC 2.01 3456789 3Com Jul 93
Operational EPROM Version: 1.00 Boot EPROM Version: 1.00
Note Pad:
16.01 6124M-TPL62 12345678 3Com 931116
Operational EPROM Version: 1.00 Boot EPROM Version: 1.00
Note Pad: Six ports assigned to engineering.
16.02 6100D-MGT v1.00 125213 3Com 931101
Operational EPROM Version: 1.00 Boot EPROM Version: 1.00
Note Pad: 5
18.016000M-RCTL v1.00 123123123 3Com 930601
Operational EPROM Version: 1.00 Boot EPROM Version: 1.00
Note Pad: Purchased backup 4/18/95
show inventory
no_verbose
verbose
no_verbose
Displays summary information.
verbose
Displays extended information (all module and hub information,
including software version).