Filter
Top Products
CLEAR SECURITY AUTOLEARN
2-25
CLEAR SECURITY
AUTOLEARN
Use the CLEAR SECURITY AUTOLEARN command to clear entries from the
Autolearning database.
To remove all old MAC addresses from the Autolearning database, you must
clear both the Autolearn Address table using the CLEAR SECURITY AUTOLEARN
slot.ALL MAC_ADDRESS command and then clear the Security Address database
using the CLEAR SECURITY PORT slot.ALL MAC_ADDRESS command.
Format
Example
The following command clears the MAC address 08-00-87-01-a7-b2 from the
Autolearning database, associated with port 3 on the module in slot 7:
CB5000>
clear security autolearn 7.3 mac_address 08-00-87-01-a7-b2
Port 07.03 address 08-00-87-01-a7-b2 cleared from autolearning
area.
Related Commands
SET SECURITY AUTOLEARN
SHOW SECURITY AUTOLEARN
slot.port Identifies the port for this operation.
slot is the slot (1 through 17) and port is the port number
(1 through 40). For example, to identify port 4 on the module in slot
6, enter
6.4
slot.
all
Specifies all ports in a slot. slot
is the slot number.
address MAC address you are clearing using this command. The format for
MAC addresses is nn-nn-nn-nn-nn-nn.
The address 00-00-00-00-00-00 is invalid for this command.
clear security autolearn mac_address
slot.port
slot.
all
address
all