Filter
Top Products
SHOW DLM
2-335
SHOW DLM
Use the SHOW DLM command to display information about DLMs (Dynamically
Loadable Modules).
Format
Example 1
The following command displays DLM-related control table entries stored in the
DMM:
CB5000> show dlm control
DLM Control Table:
Index Status Owner
----- ------ -----
1 VALID Monitor
Example 2
The following command displays the status of requests made to the DMM to
load DLMs:
CB5000> show dlm request_load_status
DLM Image Load Table:
Name Status Destination Module
---- ------ ------------------
ecam executing 01.01
Example 3
The following command identifies any DLM images currently loaded on the
DMM:
CB5000> show dlm loaded_image
Loaded DLM Table:
Name Reason Version Load Source
---- ------ ------- -----------
ecam application 01.00 PATH:TFTP:ecam:151.104.20.81
Related Command
SET MODULE DLM_MODE
show dlm control
request_load_status
loaded_image
control
Displays control table entries.
request_load_status
Displays status of requests made to the DMM to load DLMs.
loaded_image
Displays a table showing DLM images currently loaded on the
DMM.