Filter
Top Products
2-230
SET SECURITY AUTOLEARN CAPTURE
SET SECURITY
AUTOLEARN CAPTURE
Use the SET SECURITY AUTOLEARN CAPTURE command to initiate the
Autolearn feature for a specified port.
This command applies to the CoreBuilder 5000 Token Ring modules only.
Autolearning allows the DMM to continuously monitor network activity and
automatically learn the valid MAC addresses associated with a port on the
module.
Format
Example
The following command allows the MAC addresses associated with all ports on
the module in slot 3 to be learned by the DMM during Autolearning:
CB5000> set security autolearn 3.all capture
Autolearn capture done; learned 3 addresses total.
Related Commands
CLEAR SECURITY AUTOLEARN
SHOW SECURITY AUTOLEARN
slot.port Identifies the port for this operation.
slot (1 through 17) is the slot number location of a module in the hub
and port (1 through 20) is the port number on the specified module.
For example, to identify port 4 on the module in slot 6, enter
6.4
slot.
all
Specifies all ports in a slot. slot is the slot number.
capture
Instructs the DMM to learn all valid addresses for a port.
set security autolearn capture
slot.port
slot.
all