Filter
Top Products
14
A
BOUT
T
HIS
G
UIDE
Related Documents
This section provides information on supporting documentation, including:
■
3Com Documents
■
Reference Documents
3Com Documents
The following document provide additional information on 3Com products:
■
CoreBuilder 5000 Quick Start and Reference Guide — Provides information on
the installation, operation, and configuration of the CoreBuilder 5000 hub.
This guide also describes the principle features of the CoreBuilder 5000
Fault-Tolerant Controller Module.
■
CoreBuilder 5000 Distributed Management Module User Guide — Provides
information on the CoreBuilder 5000 Distributed Management Module’s
operation, installation, and configuration. This guide also describes the
software commands associated with the Distributed Management Module.
For a complete list of 3Com documents, contact your 3Com representative.
Reference Documents
The following documents supply related background information:
Case, J., Fedor, M., Scoffstall, M., and J. Davin
, The Simple Network
Management Protocol, RFC 1157, University of Tennessee at Knoxville,
Performance Systems International and the MIT Laboratory for Computer Science,
May 1990.
Rose, M., and K. McCloghrie
, Structure and Identification of Management
Information for TCP/IP-based Internets, RFC 1155, Performance Systems
International and Hughes LAN Systems, May 1990.
Table 3
Text Conventions
Convention Description
“Enter” vs. “Type” When the word “enter” is used in this guide, it means type something,
then press the Return or Enter key. Do not press the Return or Enter key
when an instruction simply says “type.”
Text represented as
screen display
This typeface
is used to represent displays that appear on your
terminal screen. For example:
NetLogin:
Text represented as
commands
This typeface
is used to represent commands that you enter. For
example:
SETDefault !0 -IP NETaddr = 0.0.0.0
Italics Italics are used to denote new terms or emphasis. In command
“Format” sections, italics denote variables for which you provide one of
the allowed values.