Filter
Top Products
2-362
SHOW PORT
SHOW POWER
Use the SHOW POWER command to display the power budget, power modes, and
power information on a per-slot basis. The SHOW POWER command displays the
power settings for the hub, including the amount of power available, and the
amount of power consumed, in the hub.
Format
Example
The following command shows the output of the SHOW POWER ALL command:
CB5000> show power all
Power Management Information
----------------------------
Hub Power Modes:
Fault-Tolerant Mode: NON_FAULT_TOLERANT
Fault-Tolerant Status: NON_FAULT_TOLERANT
Overheat Power Down Mode: ENABLE
Slot Power Information:
Slot Class Admin Status Operating Status
---- ----- ------------ ----------------
1 N/A ENABLE ENABLED
2 N/A ENABLE ENABLED
4 N/A ENABLE ENABLED
5 N/A ENABLE ENABLED
8 N/A ENABLE ENABLED
9 N/A ENABLE ENABLED
10 N/A ENABLE ENABLED
Slot Class Admin Status Operating Status
---- ----- ------------ ----------------
11 N/A ENABLE ENABLED
14 3 ENABLE ENABLED
15 3 ENABLE ENABLED
17 3 ENABLE ENABLED
budget
Show power budget table only.
mode
Show power fault tolerance and overheat mode settings.
slot
Show power information on slot (1 through 17), or all slots.
all
Show all power settings.
show power
budget
mode
slot
all