Filter
Top Products
2-374
SHOW RMON HOST DATA
SHOW RMON HOST
DATA
Use the SHOW RMON HOST DATA command to display data from the RMON host
table. The host table collects statistics related to hosts on the network. As each
packet is monitored, the MAC adds the source address of the frame to the host
table, incrementing the appropriate “out” counters, and the probe adds the
destination address of the frame to the host table, incrementing the appropriate
“in” counters.
The host table also collects information for the Host TopN group that indicates
which hosts are generating and receiving the most network traffic (typically the
servers and routers), the most network errors, and so on.
Format
Example
The following command displays RMON host statistics for one MAC address:
CB5000> show rmon host data 1 host_address 0-0-1a-24-0-0
RMON Host display for Interface 1:
Creation Order: 13
Host Address: 00-00-1a-24-00-00
Input Packets: 1
Output Packets: 0
Input Octets: 8812
Output Octets: 0
Output Errors: 0
Output Packets (Broadcast): 0
Output Packets (Multicast): 0
Related Commands
SET RMON HOST
SET MODULE INTERFACE
SHOW MODULE
index The index entry in the RMON host table.
all
Lists all hosts.
by_creation_order
Lists hosts by the order in which the RMON agent detected them.
by_address
Lists hosts by numerical MAC address order.
host_address
Displays host data for the specified address.
mac address Specifies the MAC address for the host whose host data you want
to display.
show rmon host data
index
all
by_creation_order
by_address
host_address
mac address